Veikals
-
Pleznas Scorpena Q, melnas 68,00 €Izvēlēties
These fins feature an extended foot pocket and a shorter blade, making them more compact when disassembled and easy to fit into a suitcase.
Choose these fins if you travel frequently and need long fins
They are designed to be used with socks 5 mm thick or more.
Blade Options
The plastic blades are available in three stiffness levels:
• Super soft (for swimmers ~55-70 kg)
• Soft (~70-85 kg)
• Medium (~85-100 kg)
The material composition of the fins is specifically designed for diving in cold water conditions.
Foot Pocket and Performance
The Scorpena Q fin foot pocket is made of soft, comfortable rubber, while the section where the blade is inserted is plastic. This design increases the working area of the blade and significantly enhances kicking efficiency compared to traditional models, where the blade is held only by side rails.
Another key feature is the 25-degree blade angle relative to the foot pocket. This reduces strain on foot muscles, conserves the swimmer’s energy, and extends underwater time.
Dimensions
• Assembled fin length: 97 cm
• Blade length (separately): 67 cm
• Working blade length (from foot pocket tip): 65 cm
• Blade width: 22 cm
• Folded thickness (for transport): 15 cm
Inside length, cm
• S 39/40 24
• M 41/42 25
• L 43/44 26
• XL 45/46 28@media (max-width: 770px){.fingers-img{display:block !important;} table {width:500px !important;}}
Foot size 35 36-37 38-39 41-42 43-44 45-46 47-48 Fins size with a 3 mm sock 39-40 41-42 43-44 45-46 Fins size with a 5 mm sock 39-40 41-42 43-44 45-46 Fins size with a 7 mm sock 39-40 41-42 43-44 45-46 Fins size with a 9 mm sock 39-40 41-42 43-44 45-46 -
Pleznas Scorpena Q, brūnas 68,00 €Izvēlēties
These fins feature an extended foot pocket and a shorter blade, making them more compact when disassembled and easy to fit into a suitcase.
Choose these fins if you travel frequently and need long fins
They are designed to be used with socks 5 mm thick or more.
Blade Options
The plastic blades are available in three stiffness levels:
• Super soft (for swimmers ~55-70 kg)
• Soft (~70-85 kg)
• Medium (~85-100 kg)
The material composition of the fins is specifically designed for diving in cold water conditions.
Foot Pocket and Performance
The Scorpena Q fin foot pocket is made of soft, comfortable rubber, while the section where the blade is inserted is plastic. This design increases the working area of the blade and significantly enhances kicking efficiency compared to traditional models, where the blade is held only by side rails.
Another key feature is the 25-degree blade angle relative to the foot pocket. This reduces strain on foot muscles, conserves the swimmer’s energy, and extends underwater time.
Dimensions
• Assembled fin length: 97 cm
• Blade length (separately): 67 cm
• Working blade length (from foot pocket tip): 65 cm
• Blade width: 22 cm
• Folded thickness (for transport): 15 cm
Inside length, cm
• S 39/40 24
• M 41/42 25
• L 43/44 26
• XL 45/46 28@media (max-width: 770px){.fingers-img{display:block !important;} table {width:500px !important;}}
Foot size 35 36-37 38-39 41-42 43-44 45-46 47-48 Fins size with a 3 mm sock 39-40 41-42 43-44 45-46 Fins size with a 5 mm sock 39-40 41-42 43-44 45-46 Fins size with a 7 mm sock 39-40 41-42 43-44 45-46 Fins size with a 9 mm sock 39-40 41-42 43-44 45-46 -
Pleznas Scorpena Q, zaļas 68,00 €Izvēlēties
These fins feature an extended foot pocket and a shorter blade, making them more compact when disassembled and easy to fit into a suitcase.
Choose these fins if you travel frequently and need long fins
They are designed to be used with socks 5 mm thick or more.
Blade Options
The plastic blades are available in three stiffness levels:
• Super soft (for swimmers ~55-70 kg)
• Soft (~70-85 kg)
• Medium (~85-100 kg)
The material composition of the fins is specifically designed for diving in cold water conditions.
Foot Pocket and Performance
The Scorpena Q fin foot pocket is made of soft, comfortable rubber, while the section where the blade is inserted is plastic. This design increases the working area of the blade and significantly enhances kicking efficiency compared to traditional models, where the blade is held only by side rails.
Another key feature is the 25-degree blade angle relative to the foot pocket. This reduces strain on foot muscles, conserves the swimmer’s energy, and extends underwater time.
Dimensions
• Assembled fin length: 97 cm
• Blade length (separately): 67 cm
• Working blade length (from foot pocket tip): 65 cm
• Blade width: 22 cm
• Folded thickness (for transport): 15 cm
Inside length, cm
• S 39/40 24
• M 41/42 25
• L 43/44 26
• XL 45/46 28@media (max-width: 770px){.fingers-img{display:block !important;} table {width:500px !important;}}
Foot size 35 36-37 38-39 41-42 43-44 45-46 47-48 Fins size with a 3 mm sock 39-40 41-42 43-44 45-46 Fins size with a 5 mm sock 39-40 41-42 43-44 45-46 Fins size with a 7 mm sock 39-40 41-42 43-44 45-46 Fins size with a 9 mm sock 39-40 41-42 43-44 45-46 -
Hidrotērps Scorpena Hawaii, 3-2 mm, tumši zilā krāsā 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
S M L XL XXL 3XL Weight, kg 61-68 68-75 75-82 82-89 89-96 96-103 Height, cm 168-173 173-178 178-183 181-186 184-189 187-192 Chest, cm 89-94 94-99 99-104 104-109 109-114 114-119 Waist, cm 74-79 79-84 84-89 89-94 94-99 99-104 Hips, cm 89-94 94-99 99-104 104-109 109-114 114-119 -
Hidrotērps Scorpena Hawaii, 3-2 mm, neona dzeltenā krāsā 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
S M L XL XXL 3XL Weight, kg 61-68 68-75 75-82 82-89 89-96 96-103 Height, cm 168-173 173-178 178-183 181-186 184-189 187-192 Chest, cm 89-94 94-99 99-104 104-109 109-114 114-119 Waist, cm 74-79 79-84 84-89 89-94 94-99 99-104 Hips, cm 89-94 94-99 99-104 104-109 109-114 114-119 -
Hidrotērps Scorpena Hawaii, 3-2 mm, oranža neona krāsa 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
S M L XL XXL 3XL Weight, kg 61-68 68-75 75-82 82-89 89-96 96-103 Height, cm 168-173 173-178 178-183 181-186 184-189 187-192 Chest, cm 89-94 94-99 99-104 104-109 109-114 114-119 Waist, cm 74-79 79-84 84-89 89-94 94-99 99-104 Hips, cm 89-94 94-99 99-104 104-109 109-114 114-119 -
Hidrotērps Scorpena Hawaii, 3-2 mm, piparmētru krāsa 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
XS S M L XL Weight, kg 44-51 49-56 54-61 59-66 64-71 Height, cm 154-159 157-162 160-165 162-167 165-170 Chest, cm 76-81 81-86 86-91 89-94 94-99 Waist, cm 57-62 60-66 65-70 69-74 73-78 Hips, cm 81-86 85-90 89-94 92-98 97-102 -
Hidrotērps Scorpena Hawaii, 3-2 mm, rozā krāsā 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
XS S M L XL Weight, kg 44-51 49-56 54-61 59-66 64-71 Height, cm 154-159 157-162 160-165 162-167 165-170 Chest, cm 76-81 81-86 86-91 89-94 94-99 Waist, cm 57-62 60-66 65-70 69-74 73-78 Hips, cm 81-86 85-90 89-94 92-98 97-102 -
Hidrotērps Scorpena Hawaii, 3-2 mm, debesu zilā krāsā 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
XS S M L XL Weight, kg 44-51 49-56 54-61 59-66 64-71 Height, cm 154-159 157-162 160-165 162-167 165-170 Chest, cm 76-81 81-86 86-91 89-94 94-99 Waist, cm 57-62 60-66 65-70 69-74 73-78 Hips, cm 81-86 85-90 89-94 92-98 97-102 -
Hidrotērps Scorpena Hawaii, 3-2 mm, tirkīzs 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
S M L XL XXL 3XL Weight, kg 61-68 68-75 75-82 82-89 89-96 96-103 Height, cm 168-173 173-178 178-183 181-186 184-189 187-192 Chest, cm 89-94 94-99 99-104 104-109 109-114 114-119 Waist, cm 74-79 79-84 84-89 89-94 94-99 99-104 Hips, cm 89-94 94-99 99-104 104-109 109-114 114-119 -
Hidrotērps Scorpena Hawaii, 3-2 mm, neona zaļš 70,00 €Izvēlēties
Stylish and practical Scorpena Hawaii wetsuits are designed for many water activies, including windsurfing, kitesurfing, water skiing, SUP boarding, snorkeling, diving, rafting and kayaking.
Scorpena Hawaii suits have a complex construction: several types of neoprene of different thicknesses and with different coatings are used in its production.
To quickly roll off water and prevent hypothermia in windy conditions, the main panels, on the chest and back, are made of 3 mm highly elastic neoprene with a Meshskin coating on the outside and a fabric coating on the inside.
The lower front and back parts of the wetsuit and knee panels are made of thicker 3mm neoprene and are protected by a textile coating on both sides. The sides of the wetsuit, sleeves, collar, pants below the knees and crotch are made of thinner 2mm neoprene for greater elasticity to make the suit more tightly fit the figure and keep warm without restricting movement.
Comfortable cut and flatlock seams provide high comfort when using Scorpena Hawaii. The wetsuits’ collars feature special Glideskin neoprene, which provides the tightest and most comfortable fit, thus preventing water from entering the suit. And the adjustable Velcro closure allows for individual preferences in neck circumference.
The suit is fastened with a vertically placed plastic zipper on the back, which is corrosion-resistant in salty seawater. For convenience, the zipper pull tab is equipped with a long loop with a textured surface.@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
S M L XL XXL 3XL Weight, kg 61-68 68-75 75-82 82-89 89-96 96-103 Height, cm 168-173 173-178 178-183 181-186 184-189 187-192 Chest, cm 89-94 94-99 99-104 104-109 109-114 114-119 Waist, cm 74-79 79-84 84-89 89-94 94-99 99-104 Hips, cm 89-94 94-99 99-104 104-109 109-114 114-119 -
Hidrotērps Scorpena Hawaii, 3-2 mm, violeta krāsa 70,00 €Izvēlēties
Scorpena Hawaii wetsuits are specially designed for fans of various water sports – windsurfing and kitesurfing, water skiing and jet skiing, wakeboarding and SUP-boarding, rafting, kayaking and many others!
Scorpena Hawaii wetsuits are made of neoprene of different thickness:
– The main panels on the chest and back are made of 3mm highly elastic neoprene with a non-wetting Meshskin coating for quick water roll-off and overcooling protection
– Lower front and back and knee panels are made of 3mm thick neoprene and protected by abrasion resistant fabric on both sides
– Sides, sleeves, collar, pants below the knees and crotch are made of 2mm thinner neoprene that provides great fit and freedom of movement
– On the collar of the wetsuit we use a special Glideskin neoprene coating , which does not chafe the skin and provides the tightest and most comfortable fit to the body, thereby preventing the penetration of water under the wetsuit
@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
XS S M L XL Weight, kg 44-51 49-56 54-61 59-66 64-71 Height, cm 154-159 157-162 160-165 162-167 165-170 Chest, cm 76-81 81-86 86-91 89-94 94-99 Waist, cm 57-62 60-66 65-70 69-74 73-78 Hips, cm 81-86 85-90 89-94 92-98 97-102 -
Hidrotērps Scorpena Hawaii, 3-2 mm, sarkana krāsa 70,00 €Izvēlēties
Scorpena Hawaii wetsuits are specially designed for fans of various water sports – windsurfing and kitesurfing, water skiing and jet skiing, wakeboarding and SUP-boarding, rafting, kayaking and many others!
Scorpena Hawaii wetsuits are made of neoprene of different thickness:
– The main panels on the chest and back are made of 3mm highly elastic neoprene with a non-wetting Meshskin coating for quick water roll-off and overcooling protection
– Lower front and back and knee panels are made of 3mm thick neoprene and protected by abrasion resistant fabric on both sides
– Sides, sleeves, collar, pants below the knees and crotch are made of 2mm thinner neoprene that provides great fit and freedom of movement
– On the collar of the wetsuit we use a special Glideskin neoprene coating , which does not chafe the skin and provides the tightest and most comfortable fit to the body, thereby preventing the penetration of water under the wetsuit
@media (max-width: 770px){.fingers-img{display:block !important;} .mobile-changes {width:500px !important;}}
XS S M L XL Weight, kg 44-51 49-56 54-61 59-66 64-71 Height, cm 154-159 157-162 160-165 162-167 165-170 Chest, cm 76-81 81-86 86-91 89-94 94-99 Waist, cm 57-62 60-66 65-70 69-74 73-78 Hips, cm 81-86 85-90 89-94 92-98 97-102
